Products

DOB: 2025 Sex: Male Bloodline: Izumiya Please note: The pectoral fins are slightly misshapen. This will not affect the health of the Koi. Priced to reflect this.    This fish has been spawned from high-quality Japanese parents. Cuttlebrook Koi Farm has been breeding and growing Koi at their farm since it was first built in 1990. Over the years they have developed a reputation for producing the finest quality Nishikigoi.

Easy-to-use filter system A compact member of the Nexus family, the EazyPod is a mechanical and biological filter system for ponds up to 10,000 litres.The EazyPod utilises 18 litres of static K1 Micro, which provides enhanced biological benefits, even when using the EazyPod solely as a mechanical waste filter. Available in Grey or Granite Green colours. Overview A compact member of the Nexus family, the EazyPod is a mechanical and biological filter system for ponds up to 10,000 litres. The EazyPod utilises 18 litres of static K1 Micro, which provides enhanced biological benefits, even when using the EazyPod solely as a mechanical waste filter. Also available as EazyPodAir models, which come supplied with AirPump70 Kit. Specifications Model Max Pond Size Ornamental Fish Max Pond Size with Koi Max Feed Rate Volume of water in filter Max flow rate Recommended air pump UV-C bulb 10,000 Litres2,200 Gallons2,640 Us Gallons 10,000 Litres2,200 Gallons2,640 US Gallons 100 - 125g Per Day 80 Litres18 Gallons21 US Gallons 10,000 Lph2,200 Gph2,640 US Gph Air Pump 70 Kit (Not supplied) x 10,000 Litres2,200 Gallons2,640 US Gallons 10,000 Litres2,200 Gallons2,640 US Gallons 100 - 125g Per Day 80 Litres18 Gallons21 US Gallons 10,000 Lph2,200 Gph2,640 US Gph Air Pump 70 Kit (supplied) x 10,000 Litres2,200 Gallons2,640 US Gallons 10,000 Litres2,200 Gallons2,640 US Gallons 100 - 125g Per Day 80 Litres18 Gallons21 US Gallons 10,000 Lph2,200 Gph2,640 US Gph Air Pump 70 Kit (supplied) 18 W PL-L Eazypod and Eazypod Air The Eazypod and the Eazypod Air are the same product. However the Eazypod Air includes an Airpump 70 Kit. How the EazyPod works Water from the pond enters the EazyPod via the inlet and then flows around the circumference of the outer chamber of the EazyPod, passing through the stainless steel grill causing many of the larger solids to be filtered out and settle in the base of the outer chamber. This is the first stage of mechanical filtration. As water enters the central chamber, through the stainless steel grill, the fine smaller solids become trapped in the mass of K1 Micro. Bio-films build up on the protected surface area within each piece of media, allowing biological filtration to take place. After passing through the K1 Micro, the clean water then rises and overflows into the inner return pipe and flows back to the pond via the outlet. The EazyPod is incredibly simple to clean. The connected air pump is used during the cleaning cycle to agitate the K1 Micro to free up any debris and waste that has built up within the filter. A 70 litre per minute air pump is recommended for use during the cycle cleaning. *Only EazyPodAir and EazyPod Complete models are supplied with a 70 litre per minute air pump and accessory kit. Installing the EazyPod PUMP-FED INSTALLATION By this we mean that if your pump is going to be used to supply the water to the filter, and the filtered water then returns back into your pond via gravity, i.e. down a waterfall, or through a large diameter pipe, this is referred to as PUMP FED (i.e. the water is fed to the filter using a pump). GRAVITY-FED INSTALLATION *User modification is required on the EazyPod to enable Gravity Fed installation. By this we mean that your pump is going to be used to return the filtered water to the pond and therefore your filter will be supplied by gravity via a larger diameter pipe. In this situation the water level in the filter will be at the same level as the pond.

The EazyPod Automatic is a self cleaning, automatic mechanical and biological filter system for garden ponds up to 10,000 litres. A control box fitted to the side of the  filter contains an adjustable timer that initiates a cleaning cycle automatically - even when you’re not there! Overview Inside the control box, the electronic connector blocks control the automated waste valve, along with your circulating pump (not included). It even houses an  air pump that kicks in automatically to clean the K1 Micro media. Crystal clear, healthy water is achieved by the filter which is powered by a static bed of K1 Micro, which also provides enhanced biological benefits too. The Eazypod UV Automatic also features an integrated 18 Watt UVC built in to the inlet section of the filter, helping to clear green water, making this a fully automatic self cleaning filter.     Specifications Model Max Pond Size Ornamental Fish Max Pond Size with Koi Max Feed Rate Volume of water in filter Recommended flow rate Recommended air pump UV-C bulb 10,000 Litres2,200 UK gallons2,640 US gallons 10,000 Litres2,200 Gallons2,640 US Gallons 100 - 125g Per Day 80 Litres18 Gallons21 US Gallons 5,000 Lph1,100 Gph1,320 US Gph Built-In Inside Control Box x 10,000 Litres2,200 UK gallons2,640 US gallons 10,000 Litres2,200 Gallons2,640 US Gallons 100 - 125g Per Day 80 Litres18 Gallons21 US Gallons 5,000 Lph1,100 Gph1,320 US Gph Built-In Inside Control Box 18W PL-L     How the EazyPod Automatic works The concept of the EazyPod Automatic is simple and yet innovative. Water enters via the inlet and passes over an 18 watt UV Clarifying bulb (on UV versions), helping to kill any single celled algae in the water.The water then enters the outer chamber, which runs around the entire circumference of the EazyPod. Between the outer chamber and the inner chamber, there is a stainless steel perforated screen. These perforations are situated in the lower half of the screen and around its entire face. This means that when the water passes from the outer to inner chamber, a downward and upward flow is created. This causes many of the larger solids to settle in the base of the outer chamber, due to the force of gravity.The size of the perforations will not allow large mechanical waste to enter the inner chamber, thus acting as a first stage mechanical filter. The inner chamber holds 18 litres of static K1 Micro media. As the water enters the inner chamber, the fine smaller solids become entrapped in the K1 Micro. After passing through the K1 Micro, the clean water then rises and overflows into the inner return pipe. From here it returns to the pond via the return outlet.The EazyPod Automatic filtration system gives water quality and clarity that surpasses all expectations. The nature and volume of the K1 Micro means, that when static, apart from being a very efficient mechanical filter, there is more than enough surface area for beneficial bacteria to colonise. Therefore on a smaller pond, the EazyPod Automatic is an excellent complete filter. Installing the EazyPod Automatic PUMP-FED INSTALLATION ONLY By this we mean that if your pump is going to be used to supply the water to the filter, and the filtered water then returns back into your pond via gravity, i.e. down a waterfall, or through a large diameter pipe, this is referred to as PUMP FED (i.e. the water is fed to the filter using a pump). Cleaning Cycle The K1 Micro is cleaned by the integrated air pump located inside the control box, that is connected to the air line in the EazyPod Automatic, which in turn goes to an air ring in the base of the inner chamber. The air ring has small holes in it which causes the K1 Micro to move and therefore clean itself. During the cleaning cycle, the finer particles escape into chamber from the K1 Micro. This waste water will be automatically dumped via a 1 inch motorised ball valve. Cleaning is fully automated on the EazyPod Automatic, and is controlled by a built-in timer, which is factory set at one clean every 3 days, however, this is easily adjustable to fit in with your pond requirements. The EazyPod Automatic will run a cleaning cycle which lasts approximately 6 and a half minutes.

Complete filtration with UVC A compact member of the Nexus family, the EazyPod Complete is a mechanical and biological filter system for garden ponds up to 10,000 litres. The EazyPod Complete utilises static K1 Micro, which provides enhanced biological benefits, even when using the EazyPod Complete solely as a mechanical waste filter. Available in Grey or Granite Green colours. Overview Unlike the EazyPod and EazyPodAir, the EazyPod Complete benefits from having an integrated 18 Watt UVC built in to the inlet section of the filter. This makes it a complete filter system in one, helping to eradicate green water, therefore delivering crystal clear and healthy water for your fish. Specifications Model Max Pond Size Ornamental Fish Max Pond Size with Koi Max Feed Rate Volume of water in filter Max flow rate Recommended air pump UV-C bulb 10,000 Litres2,200 Gallons2,640 Us Gallons 10,000 Litres2,200 Gallons2,640 US Gallons 100 - 125g Per Day 80 Litres18 Gallons21 US Gallons 10,000 Lph2,200 Gph2,640 US Gph Air Pump 70 Kit (Not supplied) x 10,000 Litres2,200 Gallons2,640 US Gallons 10,000 Litres2,200 Gallons2,640 US Gallons 100 - 125g Per Day 80 Litres18 Gallons21 US Gallons 10,000 Lph2,200 Gph2,640 US Gph Air Pump 70 Kit (supplied) x 10,000 Litres2,200 Gallons2,640 US Gallons 10,000 Litres2,200 Gallons2,640 US Gallons 100 - 125g Per Day 80 Litres18 Gallons21 US Gallons 10,000 Lph2,200 Gph2,640 US Gph Air Pump 70 Kit (supplied) 18 W PL-L Dimensions How the EazyPod Complete works Water from the pond enters the EazyPod Complete via the inlet, cascading around the 18 Watt UV-C bulb, where any algae will be exposed to the UV-C radiation. The water then flows around the circumference of the outer chamber of the EazyPod Complete, passing through the stainless steel grill causing many of the larger solids to be filtered out and settle in the base of the outer chamber. This is the first stage of mechanical filtration. As water enters the central chamber, through the stainless steel grill, the fine smaller solids become trapped in the mass of K1 Micro. Bio-films build up on the protected surface area within each piece of media, allowing biological filtration to take place. After passing through the K1 Micro, the clean water then rises and overflows into the inner return pipe and flows back to the pond via the outlet. The EazyPod Complete is incredibly simple to clean. The connected air pump is used during the cleaning cycle to agitate the K1 Micro to free up any debris and waste that has built up within the filter. All EazyPod Complete models are supplied with a 70 litre per minute air pump and accessory kit. Installing the EazyPod Complete Water from the pond enters the EazyPod Complete via the inlet, cascading around the 18 Watt UV-C bulb, where any algae will be exposed to the UV-C radiation.The water then flows around the circumference of the outer chamber of the EazyPod Complete, passing through the stainless steel grill causing many of the larger solids to be filtered out and settle in the base of the outer chamber. This is the first stage of mechanical filtration.As water enters the central chamber, through the stainless steel grill, the fine smaller solids become trapped in the mass of K1 Micro. Bio-films build up on the protected surface area within each piece of media, allowing biological filtration to take place.After passing through the K1 Micro, the clean water then rises and overflows into the inner return pipe and flows back to the pond via the outlet.The EazyPod Complete is incredibly simple to clean. The connected air pump is used during the cleaning cycle to agitate the K1 Micro to free up any debris and waste that has built up within the filter.All EazyPod Complete models are supplied with a 70 litre per minute air pump and accessory kit. Installing the EazyPod Complete PUMP-FED INSTALLATION ONLYBy this we mean that if your pump is going to be used to supply the water to the filter, and the filtered water then returns back into your pond via gravity, i.e. down a waterfall, or through a large diameter pipe, this is referred to as PUMP FED (i.e. the water is fed to the filter using a pump).