New Products

The EazyPod Automatic is a self cleaning, automatic mechanical and biological filter system for garden ponds up to 10,000 litres. A control box fitted to the side of the  filter contains an adjustable timer that initiates a cleaning cycle automatically - even when you’re not there! Overview Inside the control box, the electronic connector blocks control the automated waste valve, along with your circulating pump (not included). It even houses an  air pump that kicks in automatically to clean the K1 Micro media. Crystal clear, healthy water is achieved by the filter which is powered by a static bed of K1 Micro, which also provides enhanced biological benefits too. The Eazypod UV Automatic also features an integrated 18 Watt UVC built in to the inlet section of the filter, helping to clear green water, making this a fully automatic self cleaning filter.     Specifications Model Max Pond Size Ornamental Fish Max Pond Size with Koi Max Feed Rate Volume of water in filter Recommended flow rate Recommended air pump UV-C bulb 10,000 Litres2,200 UK gallons2,640 US gallons 10,000 Litres2,200 Gallons2,640 US Gallons 100 - 125g Per Day 80 Litres18 Gallons21 US Gallons 5,000 Lph1,100 Gph1,320 US Gph Built-In Inside Control Box x 10,000 Litres2,200 UK gallons2,640 US gallons 10,000 Litres2,200 Gallons2,640 US Gallons 100 - 125g Per Day 80 Litres18 Gallons21 US Gallons 5,000 Lph1,100 Gph1,320 US Gph Built-In Inside Control Box 18W PL-L     How the EazyPod Automatic works The concept of the EazyPod Automatic is simple and yet innovative. Water enters via the inlet and passes over an 18 watt UV Clarifying bulb (on UV versions), helping to kill any single celled algae in the water.The water then enters the outer chamber, which runs around the entire circumference of the EazyPod. Between the outer chamber and the inner chamber, there is a stainless steel perforated screen. These perforations are situated in the lower half of the screen and around its entire face. This means that when the water passes from the outer to inner chamber, a downward and upward flow is created. This causes many of the larger solids to settle in the base of the outer chamber, due to the force of gravity.The size of the perforations will not allow large mechanical waste to enter the inner chamber, thus acting as a first stage mechanical filter. The inner chamber holds 18 litres of static K1 Micro media. As the water enters the inner chamber, the fine smaller solids become entrapped in the K1 Micro. After passing through the K1 Micro, the clean water then rises and overflows into the inner return pipe. From here it returns to the pond via the return outlet.The EazyPod Automatic filtration system gives water quality and clarity that surpasses all expectations. The nature and volume of the K1 Micro means, that when static, apart from being a very efficient mechanical filter, there is more than enough surface area for beneficial bacteria to colonise. Therefore on a smaller pond, the EazyPod Automatic is an excellent complete filter. Installing the EazyPod Automatic PUMP-FED INSTALLATION ONLY By this we mean that if your pump is going to be used to supply the water to the filter, and the filtered water then returns back into your pond via gravity, i.e. down a waterfall, or through a large diameter pipe, this is referred to as PUMP FED (i.e. the water is fed to the filter using a pump). Cleaning Cycle The K1 Micro is cleaned by the integrated air pump located inside the control box, that is connected to the air line in the EazyPod Automatic, which in turn goes to an air ring in the base of the inner chamber. The air ring has small holes in it which causes the K1 Micro to move and therefore clean itself. During the cleaning cycle, the finer particles escape into chamber from the K1 Micro. This waste water will be automatically dumped via a 1 inch motorised ball valve. Cleaning is fully automated on the EazyPod Automatic, and is controlled by a built-in timer, which is factory set at one clean every 3 days, however, this is easily adjustable to fit in with your pond requirements. The EazyPod Automatic will run a cleaning cycle which lasts approximately 6 and a half minutes.

Chest to fit: S 35/37" M 38/40" L 41/43" XL 44/46" Size Tolerance +/- 1"   Free DPD Next Day Delivery on orders over £50.     

Soft against the skin and comfortable to wear. 80% Cotton 20% Polyester. Machine wash according to instructions on the label. Regular fit.  A black sweatshirt with a small sleek Koi on the front. The back is blank.    Chest to fit: S 35/37" M 38/40" L 41/43" XL 44/46" Size Tolerance +/- 1"   Free DPD Next Day Delivery on orders over £50.   

A crew-neck short-sleeved black T-Shirt. Soft against the skin and comfortable to wear. 100% Cotton. Machine wash according to instructions on the label. Regular fit.  Small CKF logo on the front, with Koi and bubbles on the back.    Chest to fit: S 35/37" M 38/40" L 41/43" XL 44/46" Size Tolerance +/- 1"   Free DPD Next Day Delivery on orders over £50.   

Create a safer environment for your fish The Evolution Aqua Detox Dechlorinator is a quick and simple method of filtering out harmful chlorine and other impurities from tap water. It is ideal for first fill, water changes and top-ups, for both ponds and aquariums. There’s no need to wait for chlorine to “gas-off” or to use liquid treatments. Simply fill up straight from the hosepipe via the Evolution Aqua Detox Dechlorinator. This unit simply connects to garden hose or rigid pipe work. Connectors are included. Hi-grade activated carbon removes chlorine, chloramine, bromine, malachite green, dyes, colours, humic acids, organics, proteins, antibiotics, hormones and ozone. 2 Sizes Available Recommended flow rate: 4 litres per minute. The 30 inch high-grade activated carbon filter will treat up to*:550,000 Litres / 122,083 U.K. Gallons / 146,615 U.S. Gallons The 12 inch high-grade activated carbon filter will treat up to*:225,000 Litres / 49,493 U.K. Gallons / 59,439 U.S. Gallons *Maximum treatable water is based on incoming 0.5ppm chlorine.

Description  Aqua-Sed is based on the tried and tested active ingredient 2-phenoxyethanol, and it comes in a 250ml bottle with an easy-to-use measuring pump. It's a liquid with a very wide safety margin and has been used for anaesthetising fish for many years (reports go back to 1943). Please note that any anaesthetic a carries a risk, sometimes because the fish may have an unknown/undiagnosed problem which may cause an issue. For this reason we do not suggest the routine use of anaesthesia of koi carp for a general check-up.   How to use/dosage The dose is dependent on water volume, not on fish size. Do not put Aqua-Sed™ into the main pond or tank, it is for use in small volumes once fish are captured. Using the pump, measure the required amount into water (1 pump/litre) into a suitably sized anaesthetic container. Gently mix the slightly oily liquid into the water. Transfer the fish into this solution and observe carefully. Some initial excitement is normal in some species. The fish itself pumps the drug across its gills, administering the dose until effective. Observe the fish throughout and remove the fish when it is suitably anaesthetised for the procedure. As a general guide, gill cover movements should be slowed but not completely stopped. Following the procedure return the fish to untreated water for recovery.   Q. What temperature should the water be when using Aqua-Sed?A. Aqua-Sed will work in water of all temperatures and there is no minimum temperature it can be used at. At lower temperatures it will take longer to take effect, so please be aware of this.   Q. How should I store Aqua-Sed?A. Aqua-Sed should be stored at room temperature to prevent the liquid from becoming too thick to mix with the water.       Q. Can I use Aqua-Sed to sedate amphibians?A. Yes, you can use Aqua-Sed to sedate amphibians at the same dosage as stated for fish, However great care should be taken and under veterinary supervision as the process will take effect much quicker due to the product being absorbed through the skin.  

High-performance controllable pond pumps Varipump by Evolution Aqua is a controllable pond pump, suitable for large ponds. Output and energy consumption can be controlled at the push of a button and the motor is quiet and reliable. Available in three sizes, Varipump is powerful enough to run the largest of ponds and filters, and in the most demanding of situations. Varipump is suitable for use in and out of a pond. Hosetail fittings included Specifications MODEL INLET OUTLET MAX FLOW (lph) MAX FLOW. (gph) MAX FLOW. (US gph) MAX. HEAD MAX. WATTS Varipump 10000 1½" 1½" 10,000 2,200 2,642 3.1m 75W Varipump 20000 2" 2" 20,000 4,400 5,283 5.5m 190W Varipump 30000 2" 2" 30,000 6,600 7,925 5.5m 450W Dimensions MODEL DIMENSIONS CABLE LENGTHS Varipump 10000 267mm (L) x 122mm (W) x 162mm (H) 2 metre cable from plug to control box10 metre cable from pump to control box Varipump 20000 319mm (L) x 142mm (W) x 181mm (H) Varipump 30000 370mm (L) x 155mm (W) x 205mm (H)  

Use the same food as the UK's premier Koi Farm! Our food range offers complete nutrition for every size of Koi. Fed to over half a MILLION Koi a year on our farm alone Exceptional growth rates, taking numerous fish to over 50cm at less than 12 months old Promotes good body shape Brilliant skin quality and vibrant colours Hundreds of happy customers (and fish) Fantastic value for money  See our video: Feeding Guide Feed 2-4 times per day depending on fish size and water temperature and no more than the Koi eat within 5 minutes. The smaller the Koi, the more often they need feeding. The more you feed, the more waste the Koi will produce, resulting in more water changes/filter cleans required. Optimum growing temperature is 23c. Remove uneaten feed from the pond in case of overfeeding. At water temperatures below 10c Koi have a reduced appetite and slow digestion, therefore feed accordingly. Don't feed Koi if the water temperature is below 5c. Fast, Free Delivery £50 All our Koi Food orders as dispatched via DPD 24 Tracked Delivery. Order before 2pm for next-day delivery. Free delivery on all orders over £50. Order before 2PM on a Friday, and you can now pay to upgrade your food to arrive the next day. We do not ship goods to Northern Ireland, Channel Islands, Isle of Man, Scottish Highlands and Islands, Scilly Isles. Pellet Size Guide As a rule of thumb, a Koi over 4 inches (10cm) will be able to eat a 3mm pellet. A 6-inch (15cm) Koi will be able to eat a 4.5mm pellet and a 16-inch (40cm) Koi will be able to eat a 6mm pellet. Please see the chart below for a complete sizing guide.  KOI SIZE (INCHES) FEED PELLET SIZE (MM) 0.5-1.5 FRY FOOD 0.5-0.8 1.5-2 FRY FOOD 0.8-1.2 2-4 PREMIUM JUNIOR  2 4 + PREMIUM GROWTH 3 6 + PREMIUM GROWTH 4.5 16 + PREMIUM GROWTH 6 Ingredients 3.0MM  Crude protein 48%, Crude Fat 13%, Crude Fibre 0.7%, Crude Ash8.3%, Phosphorus 1.29%,Calcium 2.2%,Sodium 0.4%. Composition: Poultry meal, wheat, fish meal, wheat gluten, rape oil,fish oil, yeast product.Vitamins: Vitamin A– 10000 IU/kg, Vitamin C(stable) - 300 mg/kg,Vitamin E– 200 mg/kg,VitaminD3– 1991 IU/kg. Antioxidants:E310 Propylgallate- 50mg kg, E320Butylated hydroxyanisole –50mg/kg.Trace elements: 3b107 Iron– 40.2mg/kg, 3b202 Iodine – 3.4 mg/kg, 3b407 Copper –3.4 mg/kg, 3b505 Manganese –13.4 mg kg, 3b612 Zinc – 40.2 mg/kg. 4.5MM Crude protein 43%, Crude Fat 14%, Crude Fibre 0.9%, Crude Ash6.2%, Phosphorus 0.95%, Calcium 1.6%, Sodium 0.3%.Composition: Wheat,poultry meal,fish meal, wheat gluten, rape oil, hydrolysed feather proteinmeal, fishoil, yeast product. Vitamins: VitaminA–10000 IU/kg,VitaminC (stable) - 300 mg kg, Vitamin E– 200 mg/kg, VitaminD3– 2130 IU/kg. Antioxidants: E310 Propylgallate– 46mg/kg, E320 Butylated hydroxyanisole –46 mg/kg.Trace elements: 3b107 Iron– 40 mg/kg,3b202 Iodine– 3.3 mg/kg,3b407 Copper–3.3mg/kg,3b505 Manganese–13.3 mg/kg,3b612 Zinc– 40 mg/kg. 6MM Crude protein 42%,Crude Fat 13%,Crude Fibre 1.4%,Crude Ash 12.8%, Phosphorus 2.22%, Calcium4.2%, Sodium 0.2. Composition: Poultry meal,wheat,hydrolysed feather protein meal,sunflower meal, fish oil, rape oil, fish meal, monocalcium phosphate, yeast product.Vitamins: Vitamin A– 10000IU/kg,Vitamin C (stable) - 300 mg/kg,Vitamin E– 200 mg/kg,Vitamin D3– 1942IU/kg. Antioxidants: E310 Propylgallate– 42mg/kg,1b320 Butylated hydroxyanisole - 42mg/kg.Trace elements:3b107 Iron– 40mg/kg,3b202 Iodine– 3.3mg/kg,3b407 Copper– 3.3mg/kg,3b505 Manganese–13.3 mg/kg,3b612 Zinc– 40 mg/kg.                   Extruded complete feed for all pond fish. Packaged in the UK. 

Unfortunately, due to a number of people not turning up for their appointments, we have introduced a booking fee of £20, which will be refunded after your visit.  A one hour appointment is for a maximum of five people (this includes children). Please do not bring your dog with you.  All of the Koi that we currently have for sale can be seen on our website. When you visit, some of the Koi in our sales tanks are sold awaiting dispatch or collection, so please bear this in mind. 

Key Features  Improves water quality and clarity  Includes advanced K+Media  Traps particles down to one micron  Patent pending air backwash system  Use in conjunction with any filtration system  Additional mechanical and biological filtration  Easy to install, simple to clean Innovative Polisher For Ponds The NEW Tempest Filter is an innovative polishing system for ponds. The Tempest Filter uses our latest filtration media, K+Media, to deliver crystal clear, healthy water. Designed to be used in conjunction with any filtration system, the Tempest Filter offers additional mechanical and biological filtration. The Tempest Filter can be installed on a variety of set-ups and can be used on quarantine systems or as astandalone filter on smaller ponds up to 5,000 Litres / 1,100 Gallons. Independently Tested Filter Media Using Evolution Aqua’s K+Media as the filter media, particles down to one micron can be filtered. On a single pass, testing has proven our media capable of removing all particles down to 25 micron when used at the optimum flow rate. Not only that, K+Media is the result of extensive research and development and is moulded with minerals for faster maturation times.      Evolution Aqua filter media has been independently tested by Cranfield University and the IFTS (Institut de la Filtration et des Techniques Séparatives). IFTS International Filter Testing Services is the international reference for solid-liquid separation. Founded in 1981, IFTS is an independently regulated, ISO 17025 accredited, laboratory and research center focusing on liquid filtration and separation science. IFTS quality management system is certified to ISO 9001:2015. How The Tempest Filter Works   Water is pumped up through the Tempest Filter. The K+Media moves to the top of the filter, becoming a mechanical barrier that traps debris as it flows through the system. Waste is trapped in the K+Media until the cleaning cycle dislodges it and it gets flushed away. How To Clean The Tempest Filter   The Tempest Filter can be cleaned in matter of minutes, by simply turning the pump off, closing ball valves and opening the waste valve tap.   Specifications   Max Pond Size Inlet Outlet Drain Size Max Flow Rate Optimum Flow Rate Volume of Water in Filter Dimensions Amount of K+Media Supplied 5,000 Litres1,100 UK Gallons1,320 US Gallons 1½” UK / USA50mm EU 1½” UK / USA50mm EU 1” UK / USA32mm EU 7,500 Litres/hr1,650 UK Gallons/hr1,980 US Gallons/hr 5,000 Litres/hr1,100 UK Gallons/hr1,320 US Gallons/hr 27 Litres5.9 UK Gallons7.1 US Gallons 1055mm x 250mm x 205mm 7 Litres Installing the Tempest Filter There are a number of ways the Tempest Filter can be installed on your pond system. Below are some typical installation ideas. PLEASE NOTE: The ball valves fitted to the Tempest Filter allow connection to 1½” pressure pipe. If installing the Tempest Filter using flexible hose you will need to fit a reducing sleeve (EA Code: M35-050) and a 1½” solvent weld stepped hosetail (EA Code: HOSETAIL15) inside each slide valve. To allow the Tempest Filter to give the best performance, it is important that the flow rate is no more than the 5,000 litres per hour. Some of the installation examples show aby-pass that will enable you to increase the flow through the pond.   TYPICAL INSTALLATION WITH A GRAVITY-FED FILTER You can install a Tempest Filter after a primary filter on a gravity-fed set-up, such as the Nexus+, and after a UV Clarifier, such as an evoUV. The slide valves on the Tempest Filter enable connection to 1½” pressure pipe. The installation example shown below has a by-pass that will enable you to increase the flow through your pond while maintaining the optimum flow through the Tempest Filter. Installing ball valves on the pipe work will help you regulate the flow. The return from the Tempest can go back to the centre of your Nexus+ or back into the pond.   TYPICAL INSTALLATION ON A PRESSURISED SYSTEM You can install a Tempest Filter on a pressurised system with a K1 Micro Bead, Nexus+, EazyPod. The slide valves on the Tempest Filter enable connection to 1½” pressure pipe. The installation example shown below has a by-pass that will enable you to increase the flow through your pond while maintaining the optimum flow through the Tempest Filter. Installing ball valves on the pipe work will help you regulate the flow. The return from the Tempest and the K1 Micro Bead go back to the pond.   TYPICAL STANDALONE TEMPEST FILTER INSTALLATION   You can install a Tempest Filter on a quarantine system, or a standalone pond up to 5,000 litres, at the side of a pond or above the pond. The slide valves on the Tempest Filter enable connection to 1½” pressure pipe. If installing the Tempest Filter using flexible hose you will need to fit a reducing sleeve (EA Code: M35-050) and a 1½” solvent stepped hosetail (EA Code: HOSETAIL15) inside each slide valve. TYPICAL SKIMMER LINE INSTALLATION   You can install a Tempest Filter on a skimmer line. The slide valves on the Tempest Filter enable connection to 1½” pressure pipe. If installing the Tempest Filter using flexible hose you will need to fit a reducing sleeve(EA Code: M35-050) and a 1½” solvent stepped hosetail (EA Code: HOSETAIL15) inside each slide valve.   MODULAR TEMPEST FILTER INSTALLATION   On larger systems that require a higher flow rate, multiple Tempest Filters can be installed in a modular system. The slide valves on the Tempest Filter enable connection to 1½” pressure pipe. If installing the Tempest Filter using flexible hose you will need to fit a reducing sleeve (EA Code: M35-050) and a 1½” solvent stepped hosetail (EA Code: HOSETAIL15) inside each slide valve. It is important that each Tempest Filter can be isolated using the slide valves so that cleaning can be carried out independently. Although on the installation diagram below we show two filters into one return line, independent return lines will allow you to observe the flow rate through both Tempest Filters and balance accordingly.   Dimensions   New advanced filtration media Plastic media, for use in biological pond filters - specifically in moving bed bio reactors, was pioneered by Evolution Aqua, some 20 years ago. In recent years, other plastic media have come onto the market, usually with the aim of trying to get more and more surface area. However, one drawback to using plastic media has always been the time it takes to establish a stable biofilm – essential for good filtration.  After many years of research, Evolution Aqua have now developed a new media that not only gives class leading surface area, but also overcomes the problem of long maturation times. K+Media is designed and manufactured in the UK by Evolution Aqua. This advanced media, with its innovative design, and class leading surface area provides enhanced biological and mechanical filtration.  As Evolution Aqua extrude K+Media, Minerals and Enzymes are added to the raw material. The result of this process, unique to Evolution Aqua, is a filtration media that not only outperforms most of its competitors due to its large protected surface area, but also answers the problem of how to speed up the time taken to mature your filter.

Reliable and economical air pumps As we all know, oxygen is vital to all aquatic inhabitants whether they are Koi, goldfish, tropical / marine fish or bacteria. The EA Air pump range provides high performance diaphragm air pumps for all fish keepers. The range was purposely developed for fish keepers to deliver that essential element into their ponds - specifically air. EA Air pumps have been tested and proven to provide the highest output at any given depth, to be economical to run and to be totally reliable. Well engineered, robust and durable, every unit has thermal protection fitted as standard.   Specifications Specification AirPump 70 Complete Kit AirPump 75 AirPump 95 AirPump 130 AirPump 150 Maximum Output lpm 70 75 95 130 150 Maximum Output (USA) 62 62 95 130 155 Output at 1m Depth - lpm 52 59 78 110 130 Output at 1m Depth - USA 52 52 78 115 135 Max. operating depth 3.2m 3.9m 4.35m 4.7m 5.5m Max. operating depth (USA) 4.2m 4.4m 4.5m 5.0m 5.6m Power Usage - Watts 34 44 62 88 106 Noise level - dBA <46 <46 <47 <50 <50 Voltage (VAC) 220 - 240V 220 - 240V 220 - 240V 220 - 240V 220 - 240V Voltage (VAC) 110 - 120V 110 - 120V 110 - 120V 110 - 120V 110 - 120V    

This 25 pack of reagents is for use with the HI-711-25 Reagents for HI-711 Total Chlorine Pocket Checker The HI-711-25 are high-quality reagents that are pre-measured, allowing for users to achieve fast and accurate measurements with their Total Chlorine Checker® HC - HI-711. These reagents follow the DPD Method in which the reaction between chlorine and reagent causes a pink tint in the sample. By simply adding the packet of HI-711-25 reagent to the sample, the reaction will take place and the HI-711 will determine the concentration from the colour that is produced. The results will be displayed in ppm (mg/L) of total chlorine. These reagents are designed to be used with samples that have an expected range of 0.00 to 3.50 ppm (mg/L) total chlorine.   Tip for an accurate measurement It is important that the sample does not contain any debris. Whenever the cuvette is placed into the measurement cell, it must be dry outside and completely free of fingerprints, oil or dirt. Wipe it thoroughly with HI-731318 or a lint-free cloth prior to insertion. Shaking the cuvette can generate bubbles, causing higher readings. To obtain accurate measurements, remove such bubbles by swirling or by gently tapping the cuvette. Do not let the reacted sample stand for too long after reagent is added, or accuracy will be lost. After the reading, it is important to discard the sample immediately, otherwise the glass might become permanently stained.

We are now offering a high-quality Wheatgerm diet for our customers who prefer to feed Wheatgerm during the winter months. On the farm we feed our Premium Growth all year round, however, we can understand why our customers may prefer to feed Wheatgerm. We have selected this diet from Evolution Aqua as one we recommend.  Supplied by us in two sizes, a 6kg bucket or a 15kg sack. This is a floating pellet, available in Small (3-4mm) and Large (5-6mm).  Evolution Aqua's Wheatgerm pellets contain Omega 6 and 3, however, there are NO added artificial colourings.    COMPOSITION Soya, Wheat, Meat and Bone Meal, Wheat Feed, Wheat Germ (min 9%), Maize, Oats, Salmon Oil, Fish Meal, Minerals, Vitamins ANALYTICAL CONSTITUENTS  Crude Protein 28%, Crude Oils & Fats 8%, Crude Fibres 4.5%, Crude Ash 10%, Omega 6 1.3%, Omega 3.1% ADDITIVES Vitamins: Vitamin A 13,889 IU/kg, Vitamin D3 2,083 IU/kg, Vitamin C(as ascorbyl monophosphate) 1,189 mg/kg, Vitamin E (as alpha-tocopherol acetate) 185 mg/kg; TRACE ELEMENTS  Ferrous Sulphate Monohydrate 154 mg/kg (Iron 46 mg/kg), Zinc Sulphate Monohydrate 129 mg/kg (Zinc 46 mg/kg), Manganous Sulphate Monohydrate 101 mg/kg (Manganese 32 mg/kg), Cupric Sulphate Pentahyrate 56 mg/kg (Copper 14 mg/kg), Calcium Iodate 1.52 mg/kg (Iodine 0.93 mg/kg), Sodium Selenite 0.62 mg/kg (Selenium 0.28 mg/kg)   FAST, FREE DELIVERY OVER £50 All our Koi Food orders as dispatched via DPD 24 Tracked Delivery. Order before 2pm for next-day delivery. Free delivery on all orders over £50.Order before 2PM on a Friday, and you can now pay to upgrade your food to arrive the next day. We do not ship goods to Northern Ireland, Channel Islands, Isle of Man, Scottish Highlands and Islands, Scilly Isles.

Reagent for HI -707 Nitrite Marine Low Range Pocket Checker This reagent is for use with the HI-707 nitrite low range pocket checker and provides enough for 25 tests. The HI-707-25 are high-quality reagents that are pre-measured, allowing for users to achieve fast and accurate measurements with their Nitrite Low Range Checker® HC. These reagents follow the Diazotization Method in which the reaction between nitrite and reagent causes a pink tint in the sample. By simply adding the packet of HI-707-25 reagent to the sample, the reaction will take place and the HI-707 will determine the concentration from the colour that is produced. The results will be displayed in ppb of nitrite. These reagents are designed to be used with samples that have an expected range of 0 to 600 ppb nitrite. Tip for an accurate measurement It is important that the sample does not contain any debris. Whenever the cuvette is placed into the measurement cell, it must be dry outside and completely free of fingerprints, oil or dirt. Wipe it thoroughly with HI-731318 or a lint-free cloth prior to insertion. Shaking the cuvette can generate bubbles, causing higher readings. To obtain accurate measurements, remove such bubbles by swirling or by gently tapping the cuvette. Do not let the reacted sample stand for too long after reagent is added, or accuracy will be lost. After the reading, it is important to discard the sample immediately, otherwise the glass might become permanently stained.

Key features Small palm-sized design Accurate from ±20 ppb ± 5% of reading Dedicated to a single parameter Uses a single AAA battery Auto Power Off after 10 minutes inactivity Built-in timer for timed reaction readings Supplied with 2 cuvettes and caps Reagent starter kit (6 packets of nitrite LR reagent) - re-ordering information: HI-707-25 1 x 1.5V AAA battery Instruction manual Specifications Range 0 to 600 ppb NO2-N Resolution 1 ppb Accuracy @ 25°C ±20 ppb ±5% of reading Light source LED @ 470 nm Light Detector Silicon photocell Method Adaptation of the EPA Diazotisation method 354.1 Environment 0 to 50°C; RH max 95% non-condensing Battery Type (1) 1.5V AAA Auto-off After ten minutes of non-use Dimensions 81.5mm x 61mm x 37.5mm Weight 64g Ordering Information HI-707 Checker® is supplied with (2) sample cuvettes with caps, nitrite LR reagent starter kit for 6 tests (6 powder reagent packets), battery, instructions and quick start guide.

This 25 pack of reagents is for use with the HI-700 Ammonia Low Range Pocket Checker. The HI-700-25 are high-quality reagents that are pre-measured, allowing for users to achieve fast and accurate measurements with their Ammonia Checker® HC. These reagents follow the Nessler Method in which the reaction between ammonia and reagents causes a yellow tint in the sample. By simply adding 4 drops from each bottle of HI-700-25 reagent set to the sample, the reaction will take place and the HI-700 will determine the concentration from the colour that is produced. The results will be displayed in ppm (mg/L) of ammonia-nitrogen (NH3-N). These reagents are designed to be used with samples that have an expected range of 0.00 to 3.00 ppm ammonia-nitrogen. To convert the reading to ppm of ammonia (NH3) multiply the result by 1.214. Tip for an accurate measurement It is important that the sample does not contain any debris. Whenever the cuvette is placed into the measurement cell, it must be dry outside and completely free of fingerprints, oil or dirt. Wipe it thoroughly with HI-731318 or a lint-free cloth prior to insertion. Shaking the cuvette can generate bubbles, causing higher readings. To obtain accurate measurements, remove such bubbles by swirling or by gently tapping the cuvette. Do not let the reacted sample stand for too long after reagent is added, or accuracy will be lost. After the reading, it is important to discard the sample immediately, otherwise the glass might become permanently stained.

Key features Small palm-sized design Accurate from ±0.05ppm ± 5% of reading Dedicated to a single parameter Uses a single AAA battery Auto Power Off after 10 minutes in inactivity Built-in timer for timed reaction readings Order Information The HI-700 Checker®HC is supplied with sample cuvettes with caps (2), ammonia LR reagents starter kit x 25 tests (HI-700-25), battery, instruction manual and a quick start guide. Specifications Range 0.00 to 3.00 ppm NH3-N Resolution 0.01 Accuracy @ 25°C ±0.05 ppm ±5% of reading Light source LED @ 470 nm Light Detector Silicon photocell Method Adaptation of the ASTM Manual of Water and Environmental Technology D1426-92, Nessler Method. The reaction between ammonia and reagents causes a yellow tint in the sample. Environment 0 to 50°C; RH max 95% non-condensing Battery Type (1) 1.5V AAA Auto-off After ten minutes of non-use Dimensions 81.5mm x 61mm x 37.5mm Weight 64g Ordering Information HI-700 Checker® is supplied with (2) sample cuvettes with caps, ammonia reagent starter kit for 25 tests (1 bottle of HI-700A-0 reagent A and 1 bottle of HI-700B-0 reagents B), battery, instructions. PLEASE NOTE: In some cases, samples may contain other parameters which may interfere with results  Interference may be caused by: Hardness above 1 g/LIronSulphideGlycineVarious aliphatic and aromatic aminesOrganic chloraminesAcetoneAldehydesalcohols

Automatic fish feeder for ponds evoFeed Automatic is an automatic fish feeder suitable for medium and largeponds. The unit can be programmed to dispense food into the pond at timedintervals throughout the day. The distance the food is propelled, and theamount of time it is dispensed for, are also adjustable. Weatherproof, evoFeed Automatic can be mounted pond side, and is poweredvia its own built-in, rechargeable battery. evoFeed Automatic is ideal for Koi ponds where large quantities of pellets arefed frequently, throughout the day. It is also ideal for holiday feeding. Battery Powered - Up to 3 months on a single charge The feeder is designed to use pellets from 3-10 mm diameter. We do not recommend the use of sticks, flakes or other shapes of food. The rechargeable lithium battery only needs an overnight charge indoors, to then operate for at least 3 months powered by its own battery, depending of the timer setting. Adapter for charging is included. The feeder will work as normal when adapter is plugged in. evoFeed Automatic is specially designed with a strong motor and extra bottom ventilation over the impeller to prevent the food from clogging. Fixing pegs are included, which makes it easy to place and secure the feeder at the edge of your pond. Specifications Feeding Range Food Container Volume Power Dimensions 1 to 3 metres120° angle 3 to 10mm pellets only(Not suitable for flake & stick) 6 litre capacity Built-in rechargeable battery(Indoor charger included) 370mm310mm400mm